• En
• De

SB-COMEXmini - COM Express Mini Type-10 Carrier Board

• Miniature form-factor
• HDMI, DisplayPort, LVDS
• USB3, 4x USB2, 2x GbE
• mini-PCIe, mSATA, SATA

Overview

COM Express evaluation board

SB-COMEXmini is a COM Express carrier board designed as an evaluation platform for COM Express Mini Computer-on-Modules and a reference for custom carrier board development. SB-COMEXmini is fully compliant with the COM Express standard.

Optimized for development with COM Express Mini

SB-COMEXmini has been designed to allow users full and easy access to all functions present on COM Express Mini Type-10 Computer-on-Modules. Combining extensive and highly configurable set of interfaces and connectors with rich debug functionality, SB-COMEXmini allows all around evaluation and SW development with COM Express Computer-on-Modules.

Comprehensive design reference and documentation

CompuLab provides SB-COMEXmini with comprehensive documentation and hardware design packages including technical manuals, application notes, design schematics and layout design.

Specifications

• "Option" column specifies the configuration code required to have the particular feature.
• "+" means that the feature is always available

General
Supported Modules	COM Express mini with pin-out Type 10	+
Compliance	COM Express Rev. 2.0 Pin-out Type 10	+
Display
HDMI	1x HDMI (DDI0)	+
DisplayPort	1x DP, standard DisplayPort connector * mutually exclusive with LVDS	L
LVDS	1x single-channel LVDS, 40-pos FPC connector	L
Storage
Hard Disk	1x SATA ports, SATA connector	+
mSATA	mSATA socket (mini-PCIe form-factor)	+
SD	1x uSD connector	+
Network
Ethernet	Primary Gbit Ethernet port, RJ45 connector Implemented with the COM Express Module Ethernet interface	+
	Secondary Gbit Ethernet port, RJ45 connector Implemented with on-board Intel I211 Ethernet controller	+
Audio
Analog Audio	On-board Realtek ALC888 codec Stereo line-out and line-in audio jacks	+
Digital Audio	S/PDIF output, electrical	+
	HDMI audio output	+
I/O
PCI Express	1x mini-PCie socket, full-size	+
	1x mini-PCie socket, half-size	+
USB	1x USB3.0	+
	4x USB2.0	+
Serial	1 x RS232 (RX/TX only), ultra-mini serial connector	+
GPIO	5x GPIO, 100-mil header	+
System
General Features	Feature Connector SIM socket PWR / RST buttons	+
Debug Features	SPI boot Port80 POST code display Diagnostic LED	+
Power Supply	12V DC Jack	+

Electrical Specifications
Supply Voltage	6.5V – 20V
Mechanical Specifications
Dimensions	140 x 93 mm
Weight	180 gram
Environmental and Reliability
MTTF	> 200,000 hours
Operation temperature (case)	Commercial: 0° to 70° C Extended: -20° to 70° C Industrial: -40° to 85° C. Click for availability note
Storage temperature	-40° to 85° C
Relative humidity	10% to 90% (operation) 05% to 95% (storage)
Shock	50G / 20 ms
Vibration	20G / 0 - 600 Hz

Block Diagram

Resources

Hardware Design Resources

• SB-COMEXmini design - schematics, mechanical drawings, layoutJune 10, 2015
• LVDS adapter schematicsAugust 2, 2017

Pricing & Ordering Info

Product status: Active

The CompuLab part number specifies all options available for a particular product.

P/N template: SB-COMEXmini-[L]

Minimal Configuration

Minimal configuration P/N: SB-COMEXmini
1K-units price	$85

Optional Features

Feature	Options	P/N code	Add ($)
LVDS interface	No Yes	- L	- 1
Temperature range	Commercial Extended Industrial	- TE TI	- 20 100

• Prices are specified in U.S. Dollars. Prices are periodically updated according to variations in component costs. Prices are subject to change without advance notice.

Small Quantity Orders

Pricing is specified for 1000-unit orders. In order to calculate the price for another quantity, multiply the unit price (with selected options) by the factor listed in the table below:

QTY	Factor
1K	1.0
500	1.1
100	1.2
10	1.3
1	1.4

Products

Related Topics