|
|
|
CM-T3530
Computer-On-Module
New Product !
|
|
|
|
CM-T3530
Top
|
CM-T3530
Bottom
|
| CM-T3530
Highlights |
 |
Full-featured
Computer-On-Module starting at $55
!
|
|
Cortex-A8
OMAP3503 or OMAP3530 CPU, up to 720 MHz |
|
Up to 256 Mbyte
mobile DDR |
|
Up to 512 Mbyte Flash Disk,
including filesystem protection |
|
WLAN
/ WiFi 802.11b/g
Interface |
|
Graphics controller supporting STN
and TFT panels with 1400 x
1050 max resolution
see LCD panel support |
|
H.264,
H.263, MPEG-4, MPEG-2, JPEG, WMV9 and additional video codecs
implemented by IVA2.2
Subsystem using TMS320C64x+ DSP core @ 520 MHz |
|
PowerVR
SGX GPU providing 2D / 3D graphics acceleration with OpenGL-ES
and OpenVG support |
|
General
purpose bus |
|
SD / SDIO /
MMC interfaces |
|
Camera
Interface port |
|
Sound codec with speaker and microphone support
|
|
Touchscreen
Controller |
|
USB Slave / Host / OTG
ports |
|
Serial ports, GPIO |
|
100
Mbps Ethernet port |
|
Very
low standby and active power consumption |
|
Tiny size: 66 x 44 x 7 mm |
|
Interchangeable
with other modules via CAMI connectors |
|
SB-T35 carrier board turns the CM-T3530 module into
SBC-T3530 - a
tiny single board computer |
|
The CM-T3530 is a small Computer-on-Module board designed to serve as a building
block in embedded applications. The CM-T3530 has all the components
required to run operating systems such as Linux and Windows CE. Ready packages for
these operating systems are available from
CompuLab. The small size and low
power consumption of the CM-T3530
allows its integration into hand-held and mobile devices, while its low
price makes it an ideal selection for cost-sensitive
applications. The CM-T3530 delivers a price / performance ratio significantly better than that of any other platform.
CM-T3530 is based on Texas Instruments OMAP3530
processor
which combines two CPU cores
in single package - an advanced Cortex-A8
ARM CPU for running
operating system and application code, and TMS32064x DSP for dedicated
video processing. Low voltage Mobile DDR enables very low power
consumption in regular operation and in standby. For embedded
applications, the CM-T3530 provides a general purpose local bus, 100Mbit Ethernet,
serial ports, I/O lines and
other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.
The standardized CAMI ("CompuLab's
Aggregated Module Interface") connectors of the CM-T3530 module allow
interchangeability with
other Computer-On-Module's available from CompuLab, enabling the flexibility required in
a dynamic market where application requirements
can change rapidly.
See O/S Support Coverage Map
For more information,
see Developer
Resources page
|
Block Diagram
CM-T3530
Features
"Option" column
specifies the configuration code required to have the particular
feature.
"+" means that the feature is always available.
CPU, Memory and Busses
| Feature |
Specifications |
Option |
| CPU |
Texas
Instruments OMAP3503 / OMAP3530 CPU
600 / 720 MHz, NEON™ SIMD Coprocessor
L1 cache:
112 KB (DSP), 32 KB (ARM)
L2 cache: 96 KB (DSP), 256 KB (ARM)
DMA, Interrupt
controllers, Timers |
C |
| RAM |
64 - 256 MB, Mobile DDR, 166 MHz, 32-bit |
D |
| NAND Flash Disk |
128 - 512 Mbytes, bootable |
N |
| External local bus |
16-bit,
variable rate up to 133 MHz, 1.8V levels |
+ |
Peripherals
|
Feature
|
Specifications
|
Option
|
|
Graphics
Controller
|
4/8/16/24
bit color, resolution up to 1400 x 1050, frame buffer in
system DDR. Display types support : TFT (parallel RGB), STN, composite
video - PAL / NTSC
|
+
|
|
Video
acceleration
|
IVA2.2
Subsystem TMS320C64x+ DSP core running at rate up to 520 MHz.
Supporting H.264, H.263, MPEG-4, MPEG-2, JPEG, WMV9 and
additional codecs. Part
of OMAP3530 CPU
|
C720M
|
|
2D
/ 3D graphics
|
PowerVR SGX
GPU providing 2D / 3D graphics acceleration with OpenGL-ES and
OpenVG support. Part
of OMAP3530 CPU
|
C720M
|
|
Camera
Interface
|
Direct
camera sensor support, max resolution 4096 x 4096, pixel clock
up to 130MHz. BT.601 / BT.656 Digital YCbCr 4:2:2 (8/16-Bit)
interface.
|
+
|
|
USB
|
-
Host / Slave (OTG) USB2 high-speed port, 480 Mbps
- Additional two USB2 host ports, 480 Mbps, EHCI / OHCI
compliant
|
+
U
|
|
Serial
Ports
(UARTs)
|
3
UART ports, 16550 compatible:
COM-A – 1.8V interface, partial modem controls, 3.6 Mbps
COM-B – 1.8V interface, partial modem controls, 3.6 Mbps
COM-C – RS232 interface, Rx / Tx only, 225 Kbps
|
+
|
|
General
Purpose I/O
|
Up
to 74 lines shared with other functions. Can also be used as
interrupt inputs
|
+
|
|
Keyboard
& mouse
|
USB,
keypad or redirection from COM port
|
+
|
|
Ethernet
|
SMSC
LAN9220 MAC & PHY, 10/100BaseT, Activity LED's
|
E
|
|
MMC / SD
|
MMC
/ SD / SDIO support including SDHC up to 32GB
|
+
|
|
Audio
codec
|
I2S
compliant audio codec, stereo output, differential mic input
|
+
|
|
Touchscreen
ctrl.
|
TSC2046
touchscreen controller. Support 4-wire resistive panels
|
I
|
|
RTC
|
Real Time Clock, powered by external lithium battery
|
+
|
|
WiFi
Interface
|
Implements
802.11b/g wireless connectivity standard
Supports Node to Access Point and Multi-Node (w/o access
point) methods of connection. (but cannot act as Access Point)
Marvell
88W8686 802.11b/g chipset.
On-board connector for
external antenna.
|
W
|
Electrical,
Mechanical and Environmental Specifications
| Supply
Voltage |
Single
3.8V or Lithium-ion polymer battery |
| Active power
consumption |
0.2 - 2 W, depending on
configuration and CPU speed |
| Standby/Sleep
consumption |
20 - 100 mW, depending on
configuration and mode |
| Dimensions |
66 x 44 x 7 mm |
| Weight |
16 gram |
| MTBF |
> 100,000 hours |
| Operation
temperature (case) |
| Commercial: |
0o to 70o C |
| Extended: |
-20o to 70o
C |
| Industrial: |
-40o to 85o C. Click for availability
note |
|
| Storage
temperature |
-40o to 85o
C |
| Relative
humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
| Connectors |
2 x 140 pin, 0.6 mm |
| Connector
insertion / removal |
50 cycles |
For more information see:
- CM-T3530
Reference Guide
- Developer Resources
|
