CM-T3517 Computer-On-Module

  • Low cost ARM solution for embedded applications.
  • Designed for fast integration into existing embedded systems.
  • Wide range of interfaces delivers extensive connectivity.
Overview

Product Highlights

  • Cortex-A8 Sitara AM3505 or AM3517 SoC, up to 600 MHz
  • Up to 256 Mbyte DDR2
  • Up to 512 Mbyte Flash Disk, including filesystem protection
  • WLAN / WiFi 802.11b/g Interface
  • Bluetooth Interface
  • Graphics controller supporting STN and TFT panels with 1400 x 1050 max resolution.
  • PowerVR SGX GPU providing 2D / 3D graphics acceleration with OpenGL-ES and OpenVG support
  • H/W support for H.264, MPEG-4, H.263, MPEG-2, RealVideo, WMV9 and other video codecs.
  • General purpose bus
  • SD / SDIO / MMC interfaces
  • Camera interface port
  • SDIO / MMC interface
  • Camera Interface port
  • Audio codec with speaker and microphone support
  • Touchscreen Controller
  • USB Slave / Host / OTG ports
  • Serial ports, GPIO, SPI, I2C, CAN bus
  • 100 Mbps Ethernet port
  • Tiny size: 66 x 44 x 7 mm
  • Interchangeable with other modules via CAMI connectors
  • SB-T35 carrier board turns the CM-T3517 module into SBC-T3517 - a tiny single board computer

Description

The CM-T3517 is a small Computer-on-Module board designed to serve as a building block in embedded applications. The CM-T3517 includes all the peripherals required to run operating systems such as Linux and Windows CE. Ready packages for these operating systems are available from CompuLab.

The small size and low power consumption of the CM-T3517 allow its integration into portable and space-constrained designs, while its low price makes it an ideal selection for cost-sensitive applications.

The CM-T3517 features Texas Instruments’ Sitara AM3517/05 system-on-chip based on the advanced Cortex-A8 ARM CPU with a PowerVR SGX GPU providing 2D / 3D graphics acceleration. For embedded applications, the CM-T3517 provides a general-purpose local bus, 100Mbit Ethernet, CAN bus, serial ports, I/O lines and other essential functions, while the integrated WLAN and Bluetooth interfaces implement industry standard wireless connectivity.

The standardized CAMI ("CompuLab's Aggregated Module Interface") connectors of the CM-T3517 module allow interchangeability with other Computer-On-Module's available from CompuLab, enabling the flexibility required by a dynamic market in which application requirements can change rapidly.

For feature support status, please refer to O/S Support Coverage Map.
Block Diagram
CM-T3517 block diagram
Specifications
  • "Option" column specifies the configuration code required to have the particular feature.
  • "+" means that the feature is always available

CPU, Memory and Busses

FeatureSpecificationsOption
CPUTexas Instruments AM3505 or AM3517 600 MHz CPU, NEON SIMD coprocessor.
32KB (L1) + 256KB (L2) cache. DMA, Interrupt controllers, Timers
C
RAM128 - 256 MB DDR2, 333 MHz, 16/32-bitD
NAND Flash Disk128 - 512 Mbytes, bootableN
External local bus16-bit, variable rate up to 83 MHz, 3.3V levels+

Peripherals

Feature SpecificationsOption
Graphics Controller 1 to 24 bit bpp, resolution up to 1400 x 1050, frame buffer in system DDR. Display types support : TFT (parallel RGB), STN, composite video - PAL / NTSC
+
2D / 3D graphics PowerVR SGX GPU providing 2D / 3D graphics acceleration with OpenGL-ES and OpenVG support. Part of Sitara AM3517 SoCC600G
Camera Interface REC656/CCIR-656 standard support
YCbCr 4:2:2 support
8-bit interface. Pixel clock up to 75MHz. DMA support.
+
USB- Host / Slave (OTG) USB2 high-speed port, 480 Mbps
- Additional one to four USB2 host ports, 480 Mbps
U
Serial Ports
(UARTs)
Up to 4 UART ports, 16C750 compatible:
COM-A – 3.3V interface, partial modem controls, 3.6 Mbps
COM-B – 3.3V interface, partial modem controls, 3.6 Mbps
COM-C – RS232 interface, Rx / Tx only, 225 Kbps
COM-D – 3.3V interface, partial modem controls, 3.6 Mbps
+
General Purpose I/O Up to 134 lines shared with other functions. Can also be used as interrupt inputs+
Keyboard & mouse USB, keypad or redirection from COM port+
Ethernet Sitara integrated MAC & PHY: 10/100BaseT, Activity LED'sE
MMC / SD MMC / SD / SDIO support including SDHC up to 32GB+
Audio codec I2S / McBSP compliant audio codec, stereo output, electret mic input, mic bias outputA
Touchscreen ctrl.TSC2046 touchscreen controller. Support 4-wire resistive panels I
RTCReal Time Clock, powered by external lithium battery+
WiFi
Interface
WLAN 802.11b/g wireless connectivity standard. Up to 54 Mbps. Bluetooth V2.1+EDR sub-system. 2.4GHz band, up to 3Mbps. Based on Marvell 88W8688. On-board connector for external antenna. W
CANCAN bus interface+

Electrical, Mechanical and Environmental Specifications

Supply VoltageSingle 3.3V or Lithium-ion polymer battery
Active power consumption0.2 - 2 W, depending on configuration and CPU speed
Dimensions66 x 44 x 7 mm
Weight16 gram
MTBF> 100,000 hours
Operation temperature (case)Commercial: 0° to 70° C
Extended: -20° to 70°C
Industrial: -40° to 85° C.
Storage temperature-40° to 85° C
Relative humidity10% to 90% (operation)
05% to 95% (storage)
Shock50G / 20 ms
Vibration20G / 0 - 600 Hz
Connectors2 x 140 pin, 0.6 mm
Connector insertion / removal50 cycles
Development Resources

Hardware Documentation

Hardware Design Resources

Software Resources

U-Boot

Linux

Windows CE

Archive

For previous versions of the CM-T3517 software packages, please refer to the CM-T3517 software archive.
Evaluation Kit

CM-T3517 and SBC-T3517 Evaluation Kit

Package contents:

COMMERCIAL PACKAGECOMMUNITY PACKAGE
Technical Support
Technical support for 12 months.
Support through users Forum
LCD panel compatibility verification and driver adaptation service.
-
45-day trial period. Eval Kit will be accepted for refund if the user finds the product not suitable for his needs.
-
Hardware
CM-T3517-D256-C600G-N512-E-A-I-U5-W
SB-T35-E-LL-LD-S
2GB SD card (for o/s installation)
WiFi antenna and cable
Serial port cable
HDMI to DVI cable
USB cable and adapter
3.5" 640 x 480 LCD panel with touchscreen and stylus pen
Adapters & cables for generic LCD panel interface
Keypad and cable
Lithium-ion battery, 2.85 A/h
5V power supply
Ordering Information
The CompuLab part number specifies all options available for a particular product.

P/N template:

CM-T3517-Dx-Cx-Nx-[E]-[A]-[I]-[Ux]-[W]

Minimal configuration P/N:

CM-T3517-D128-C600-N128-U1

Stock configuration P/N:

CM-T3517-D256-C600G-N512-E-A-I-U5-W

Optional Features

FeatureOptionsP/N
code
DRAM size128 MB
256 MB
D128
D256
CPU type & speedAM3505 / 600 MHz
AM3517 / 600 MHz
C600
C600G
NAND flash size128 MB
512 MB
N128
N512
EthernetNo
Yes
-
E
AudioNo
Yes
-
A
TouchscreenNo
Yes
-
I
USB, number of ports1
2
3
5
U1
U2
U3
U5
WiFi & BluetoothNo
Yes
-
W
Temperature rangeCommercial
Extended
Industrial
-
TE
TI
Software PreloadingNo
Yes
-
X