|
|
|
SBC-FITPC2i
Single Board Computer
New Product !
|

|
| SBC-FITPC2i Highlights |
 |
Full-featured PC single board
computer, tiny and
power saving |
 |
Intel Atom Z530 CPU @ 1.6 GHz |
 |
Intel US15W chipset |
 |
Up to 2GB DDR2 |
 |
4GB flash disk |
 |
DVI & LVDS display
interfaces,
up to 1920x1080 |
 |
SATA HDD interface |
 |
PXE (Ethernet) and USB boot
capability |
 |
HD Audio, line-out 2.0 / mic in
/ line-in |
 |
Two 1000 BaseT Ethernet port |
 |
802.11b/g/n WiFi |
 |
Six USB 2.0 ports |
 |
RS-232 serial port |
 |
miniSD Socket |
 |
IR receiver |
 |
Phoenix BIOS |
 |
Single 12V supply, 5W, fanless operation |
 |
Dimensions - 104 x 96 x 23 mm |
 |
Runs Windows XP,
Windows 7 and Linux |
|
| The SBC-FITPC2i is a
tiny single board computer based on Intel's Atom Z530 processor
and US15W chipset. It runs all standard operating systems and
software packages, including Linux, Windows XP and Windows 7.
The SBC-FITPC2i unique advantages include exceptionally small
size, quiet, fanless operation and very low power consumption.
SBC-FITPC2i is an extension of original SBC-FITPC2 product,
enriching its features with additions required for embedded
applications: |
| * |
Two
1000Mb Ethernet ports |
| * |
RS-232
serial port |
| * |
On-board
4GB solid state disk |
| * |
LVDS
interface |
|
| The rich
feature set of the SBC-FITPC2i is customizable according to the
price / performance targets of the user's application. |
|
| Also see other Atom-based
products available from CompuLab |
|
SBC-FITPC2i Features
"Option" column specifies
the configuration code required to have the particular feature.
"+" means that the feature is available always.
Feature
|
Specifications
|
Option
|
| CPU |
Intel Atom Processor:
Z530 - 1.6Ghz @533MHz FSB, or Z510 - 1.1GHz @400MHz FSB.
L2-512KB (dynamic sizing), L1- 32KB IC, 24KB DC.
Intel Deep Power Down (C6) technology support |
C |
| Chipset |
Poulsbo US15 Intel
System Controller Hub (INTEL SCH) |
+ |
| Memory |
1GB or
2GB DDR2, 533/400 MHz, 64-bit |
D |
| Solid State
Disk |
4GB
NAND flash disk |
N |
| Display
interface |
SDVO based DVI
interface. Hotplug support.
Optional 4-ch LVDS interface through FPC (mutually exclusive
with SD card socket) |
+
L |
| Audio |
Realtek ALC260, High
Definition Audio, Line Out, shared line-in / mic-in |
A |
| Ethernet |
Two ports, based on Gigabit
PCI-Express controller Realtek RTL8111 |
E |
| HDD Interface |
SATA-II, using Marvell 88SA8052 |
S |
| WiFi |
802.11
b/g capabilities, using WMG2503 mini PCIE module based on the
Realtek RTL8187 chipset. Up
to 54 Mbps, 2.4 GHz band. |
W |
| USB |
6 external USB ports:
3 UHCI devices (2 port/device), one EHCI (8 port/device
) support + 1 on the mini PCIE connector (EHCI only) with max.
rate up to 480 Mb/s. Four USB connectors, two other ports on
internal header. |
+ |
| Serial port |
Based on IT8761 SIO
(will be changed in future to different component) and RS-232
drivers |
Y |
| InfraRed |
USB based
infra red receiver |
I |
| BIOS |
Phoenix SecureCore
BIOS |
+ |
| SDIO slot |
mini SD connector
supporting SDIO1.1 and MMC4.1
(mutually exclusive with LVDS option) |
L |
| Extensions |
3 GPIO pins, LPC
bus, I2C bus |
|
Electrical, Mechanical and
Environmental Specifications
| Active consumption |
5-7W depending on CPU load |
| Dimensions |
104 x 96 x 23 mm |
| Weight |
90 gram |
| MTBF |
> 100,000 hours |
| Operation temperature |
| Commercial: |
0o
to 70o C |
| Extended: |
-20o to
70o C |
| Industrial: |
-40o to
85o C |
|
| Storage temperature |
-40o to 85o
C |
| Relative humidity |
10% to 90% (operation)
05% to 95% (storage) |
For more information see:
- SBC-FITPC2i Reference Guide
- Developer Resources
|